Chevron Regal R&O115 and ISO 22, 32, 46, 68, 100, 150, 220, 320, 460, 680

REGAL® R&O115 and ISO 22, 32, 46, 68, 100, 150, 220, 320, 460, 680

PRODUCT DESCRIPTION

Regal® R&O oils are turbine oils designed to give

outstanding performance in steam and hydroelectric

turbines.

CUSTOMER BENEFITS

Regal R&O oils deliver value through:

Long lubricant life provided by excellent thermal

and oxidation stability.

Excellent demulsibility helps ensure good

lubricant film strength and minimal wear through

quick water separation.

Excellent air release in turbine oil reservoir

systems by the foam inhibitor hastening the release

of foam and entrained air.

Rust protection of metal surfaces due to the use

of an effective rust and corrosion inhibitor.

Environmental benefits — All grades are

ashless. This facilitates reclaiming and recycling of

the used oils.

FEATURES

Regal R&O oils provide rust protection, oxidation

inhibition, and foam suppression.

They pass the Fresh Water Corrosion Test (ASTM D665,

Procedure A), and the severe Synthetic Sea Water Rust

Test (ASTM D665, Procedure B).

The thermal and oxidation stability of these lubricants,

due to their high level of refinement, has been further

enhanced by their unique additive systems. The high

thermal and oxidation stability help protect against

oxidation deposit formation or the generation of acidic

material.

Regal R&O oils have very good demulsibility

characteristics allowing quick release of moisture.

Regal R&O oils minimize entrained air which otherwise

could result in low lubricant film strength between

moving parts and pump cavitation.

Regal® R&O — Continued

Always confirm that the product selected is consistent with the original equipment manufacturer's recommendation for the equipment

operating conditions and customer's maintenance practices.

26 February 2010

IO-185

12-12

APPLICATIONS

Regal® R&O oils ISO 32 through ISO 150 are

recommended for use in most electric motor bearings,

air compressors, gears, hydroelectric turbines, steam

turbines, marine turbines, and non-heavy duty

hydraulic systems where OEM recommends R&O type

oils (for heavy duty hydraulic systems, customers

should consider Rando® HD oils).

These products can also be used as a general purpose

machine oil for shop use when R&O type oil is needed

or is recommended. The multifunctional characteristics

of Regal R&O type oils may allow them to replace other

special application lubricants, which can result in

reduced inventory and operating cost.

Regal R&O 32

• meets:

General Electric GEK 28143b, GEK 46506D

Alstom HTGD 90117

Siemens TLV 901304

ASTM D4304, British Standard 489, and

DIN 51515 standard organization requirements

for new lubricants used in gas and steam turbines

and auxiliary equipment

MAG Cincinnati, Cincinnati Machine P-38

Regal R&O 46

• meets:

General Electric GEK 28143b

Alstom HTGD 90117

Siemens TLV 901304

ASTM D4304, British Standard 489, and

DIN 51515 standard organization requirements

for new lubricants used in gas and steam turbines

and auxiliary equipment

MAG Cincinnati, Cincinnati Machine P-55

Regal R&O 68

• meets:

ASTM D4304, British Standard 489, and

DIN 51515 standard organization requirements

for new lubricants used in gas and steam turbines

and auxiliary equipment

MAG Cincinnati, Cincinnati Machine P-54

• suitable for use in General Electric, Alstom, and

Westinghouse hydroelectric turbines, land and

marine steam turbines, and associated reduction

gears when OEM recommends R&O type oil

Regal R&O 100

• meets:

ASTM D4304, British Standard 489, and

DIN 51515 standard organization requirements

for new lubricants used in gas and steam turbines

and auxiliary equipment

• suitable for use in General Electric, Alstom, and

Westinghouse hydroelectric turbines, land and

marine steam turbines, and associated reduction

gears when OEM recommends R&O type oil

Do not use Regal R&O in large and high temperature

gas turbines. GST® Oils are recommended for these

gas turbines.

Do not use Regal R&O 32, 46, or 68 in high pressure

systems in the vicinity of flames, sparks and hot

surfaces. Use only in well ventilated areas. Keep

container closed.

Do not use in breathing air apparatus or medical

equipment.

Note that finished lubricants may affect the adherence

of applied protective coatings (such as paint). If this

product is used where coating applications are

performed, the coating manufacturer should be

consulted regarding adequate surface preparation.

Regal R&O oils manufactured after June 26, 2009 now

have foam inhibitors to improve filtration through 3-6

micron filters in turbine equipment. Regal R&O oils

manufactured before June 26, 2009 need to use filters

with porosity greater than 12-15 microns to avoid

filtering out the foam inhibitors.

Regal® R&O — Continued

26 February 2010

12-13 IO-185