Chevron Rando® HD ISO 10, 22, 32, 46, 68, 100, 150, 220, 320

Rando® HD oils are formulated with premium base oil technology and designed to give robust protection to hydraulic pumps in mobile and stationary systems.


Rando HD oils deliver value through:

Long equipment life — Special antiwear additive package minimizes wear by protecting surfaces when load causes breakdown of the lubricant film.

Minimized downtime — Effective rust and oxidation inhibitor system helps prevent the production of abrasive particles from rust formation, and deposits, varnishes and sludges from oil breakdown, which can damage equipment surfaces and seals, and block filters prematurely.

Smooth operation — Good hydrolytic stability

and water separation characteristics promote

excellent filterability in the presence of water

contamination. Good anti-foam and air release help

ensure smooth operation and system efficiency.

Optimal oil service life — High oxidation stability

resists oil thickening and deposit formation in

service, minimizing the possibility of an unscheduled

change of hydraulic fluid.


Rando HD ISO 32, 46, and 68 are formulated with

Group II base stocks.

Rando HD ISO 100, 150, 220, and 320 are

designed for lubricant applications requiring an AGMA

R&O gear oil lubricant in the applicable viscosity grade.

Rando HD oils provide excellent:

• antiwear protection

• oxidation and corrosion inhibition

foam and aeration suppression

Under moderate loads and temperatures, the high

viscosity index of Rando HD oils help ensure good film

strength between metal surfaces and is further

enhanced by antiwear additive protection.


Rando HD ISO 10 and 22 can be used as spindle

lubricants where zinc-free oils are not a requirement.

Rando HD ISO 32, 46, or 68 are recommended for:

• vane-, piston-, or gear-type pumps, especially

where pressures exceed 1000 psi

• lightly loaded reciprocating compressors

Rando HD ISO 100, 150, 220, or 320 are

recommended for applications where AGMA rust and

oxidation inhibited oils are required:

• hydraulic equipment reduction gears where EP is not


• plain and antifriction bearings

• circulating oil systems

Rando HD oils are approved for:

Eaton-Vickers 35VQ25A pump, M-2950-S

(Mobile) and I-286-S (Stationary) (ISO 32, 46, 68)

Parker Hannifin (Denison) HFO, HF1, HF2,

T6H2OC (ISO 32, 46, 68)

Bosch Rexroth (ISO 32,46, 68)

Rando® HD — Continued

Always confirm that the product selected is consistent with the original equipment manufacturer's recommendation for the equipment

operating conditions and customer's maintenance practices.

15 April 2010



Rando® HD oils meet the requirements of:

MAG Cincinnati, Cincinnati Machine P-68 (ISO

32), P-70 (ISO 46), P-69 (ISO-68)

General Motors LS2 Specification, LH for anti-wear

hydraulic fluids (ISO 32, 46, 68)

ANSI/AGMA 9005-EO2, Industrial Gear

Lubrication, for gear lubrication as rust and

oxidation inhibited gear oils (ISO 46, 68, 100, 150,


DIN 51524-2 (ISO 32, 46, 68)

Joy HO-S (ISO 68)

Rando HD ISO 32, 46, 68, 100, 150, 220, and 320

are registered by NSF and are acceptable as lubricants

where there is no possibility of food contact (H2) in and

around food processing areas. The NSF Nonfood

Compounds Registration Program is a continuation of

the USDA product approval and listing program, which

is based on meeting regulatory requirements of

appropriate use, ingredient review and labeling


Do not use in high pressure systems in the vicinity of

flames, sparks and hot surfaces. Use only in well

ventilated areas. Keep container closed.

Do not use in breathing air apparatus or medical


15 April 2010

12-13 IO-170

Rando® HD — Continued


Minor variations in product typical test data are to be expected in normal manufacturing.